Agricultural Gearbox
The agricultural gearbox is the main mechanical element of the kinematic chain of agricultural machines. It really is normally powered by the tractor power take-off via the PTO shaft and the gearbox drives. The operating torque can also be transmitted to the gearbox by hydraulic motors or belt pulleys, in addition to chain gears.
Agricultural gearboxes will have one input shaft and at least one output shaft. If these shafts are positioned at 90° to each other, the gearbox is an ORTHOGONAL ANGLE gearbox or more typically called a right-position gearbox.

rotary tiller gearbox is definitely adopted middle equipment transmission system, mounted with the tractor of 12-80HP. Tractor wheel tracks are completely covered after tillage as the working width is much wider. The quality is dependable and the functionality is well. So it can be utilized on dried out and paddy field. It could reduce the time, laboring, and cost, etc. during operation

Increasers and Reducers
When the gearboxes have both gears with different numbers of teeth.
The gearbox is a reducer when the driving gear, i.e. the one with the input shaft, has the fewer amount of teeth (pinion), thus the result shaft rotates slower than the input shaft.
It is called an increaser when the insight shaft is mounted on the apparatus with the larger gearbox for agricultural machinery quantity of teeth (crown), therefore the output shaft rotates faster than the input shaft.
Right-angle gearboxes, distributors or rotational invert gearboxes
When the gearboxes have gears with the same number of the teeth.
The gearbox is known as right-angle when it only has two shafts (input and output),
whereas it is called a distributor when there are at least two output shafts.
It is called a rotational reverse gearbox and parallel offset in the versions with parallel shafts with two gearboxes.

Speed change
in addition to the primary couple of gears and relevant shafts, the gearboxes may also have various other gears with a different amount of teeth. The apparatus shift of the main pair of gears with the secondary types allows different speeds. The manual switch of the secondary gear pair with gears with different quantity of teeth allows adjustments to the output rotation speed.
CMR GROUP can design and manufacture also agricultural machinery applications.