The high-end economy lines GSN & GFE combine high performance with financial efficiency: both lines are also built with helical ground gears, ensuring a minimum noise level and smooth running. The full needle bearing provides been especially designed to reach high torques that beat the competition for units of the same size. All planetary carriers are manufactured as a cage made from solid material. This increases quiet operating characteristics while at the same time improving positioning precision and reducing backlash. An additional shaft sealing band ensures maximum dirt and splash water protection relative to protection class IP65 in every lines.
One method to reduce backlash is to use precision gears. The focus on manufacturing in precision gears is certainly tighter tolerances, so all around the gear will be a tighter, more specific fit. And the tighter match means much less play in the apparatus teeth, which may be the trigger of backlash in the first place. Of program, precision gears are more costly, if the application calls for high accuracy, after that precision gearing could be the way to go.
From a equipment design perspective, an easy way to lessen backlash is to ensure one’s teeth mesh tightly together. That is typically done by shortening the center distance between gears. As for pre-loading, this is often done using a spring mechanism to hold the gears firmly in place. This also eliminates the play between your gear teeth and thus eliminates backlash.
Of course, the type of gears used can also have a large impact on the amount of backlash. So for instance, some equipment types such as strain wave gears, or harmonic equipment drives, possess zero backlash.
The GSD, GSB & GSBL high-end gearbox lines are constructed in a space-optimized, two-stage design. Due to the lower zero backlash planetary gearbox torque ideals, the input stage can be dimensionally smaller than the output stage. Its short design makes the GSD series the ideal high-end gearbox for space limited applications. The low regular backlash of the GSD collection makes it the perfect fit for highly dynamic applications where highest positioning and speed accuracy is required. The flange result produces highest torsional rigidity. For the accommodation of particularly high axial loads, taper roller bearings are elective in sizes with 90 mm diameter or more. The GSB line stands for high performance in combination with low backlash and high precision. Its robust, one-piece housing permits a higher gearbox rigidity and the absorption of high radial and axial loads. The angular gearboxes of the GSBL range provide same advantages as the GSB collection; the right angle form makes the GSBL series an ideal match for all powerful applications where space is limited.
Incorrect tolerances, bearing misalignment, and manufacturing inconsistencies have a tendency to increase backlash.
AC motors and equipment motors include single-phase motors used in combination with a single-phase AC power and three-phase motors used in combination with a three-phase AC power. A single-phase motor could be operated by simply linking it to a single-phase power via the provided capacitor. A three-phase motor does not need a capacitor. All you have to is to connect the motor directly to a three-phase AC power supply.
The brand new planetary gearbox series includes the high-end gearbox lines GSD (flange equipment), GSB (inline) and GSBL (angle gear) as well as the high-end economy GSN and GFE lines. Particularly suitable applications for the new range are those that place the best demands on positioning accuracy, operating noises, running smoothness, bending rigidity and transmitted torque. The planetary gears are created to meet the highest creation requirements – all lines are equipped with precision floor helical gearing, single-piece planetary carriers and full needle bearings.