Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 electric motor. Ideal applications where a simple to match, high torque output is required. Great for student based projects which includes robots and buggies.
The unit has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. E.g. reducing to size. The electric motor is snap fitted into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor isn’t turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for little walking robots, lifting mechanisms, and various other applications where high torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to a few amps, making them ideal candidates for the DRV8833 motor driver carrier. Electric motor overheating can be caused by excessive stalling, even at suprisingly low voltages. We recommend that you utilize stall-detection sensors, or just watch your robot, to ensure that it doesn’t stall for lots of seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on the smaller threaded end of the shaft, though it is not specifically designed to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors arranged new requirements for reliability, effectiveness and economic climate with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly style provides for easy integration at this point and a truly future proof answer. The Ever-Power gear engine offers total flexibility in mounting choices includes shaft, base, face, and flange solutions. The electric motor terminal box could be mounted in option positions rotated in 90º steps around the motor frame offering for unparalleled integration possibilities.
Ever-Power gear motors comply with UNITED STATES and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total alternative for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be used outside or in wet and dusty environments without the use of additional enclosures. Full rated output is offered by the output shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the remedy for applications requiring a part turn, optional dual result, or an inability for the electric motor to be back driven. The DC right angle equipment motors are made for continuous and intermittent duty procedure. Our right angle equipment reducers are designed with many mounting plate choices, making them perfect for a variety of DC engine based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are created to generate high torque in a small package size. Worm Gear Motors are excellent for applications that require a self- locking or breaking feature since the result shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Items has a DC Worm Equipment Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Decrease Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental care Chairs / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with among our Worm Gearheads. EP Products will continue to work with you to design and produce a Worm Gear Motor that may optimize the efficiency of your unique application.
Built to your specific requirements
Engine Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor runs on the metal gear box for strength and a high torque output. Due to the special mechanical structure of the worm drive the engine output shaft is definitely self locking and will not be rotated.
This part uses a two wire connection and supports direction control as well as PWM speed control. Ranked voltage is 12v and will obtain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear products from EP DRIVESYSTEMS especially display their strength in applications where high gear ratios are necessary. Our worm geared motors are for that reason optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions allow simple and efficient cleaning of the drive program.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each of these has its unique requirements. The EP series worm gear motors could be quickly and effectively worm motor adapted to fulfill your needs.
Worm gear units impress with their high power density and small style. If required, we are able to also supply them with the highly effective nsd tupH surface area treatment.
As well as the basic EP casing, we offer an extensive type of bolt-on components to customize the product including torque arms, shaft covers and output flanges. These could be very easily field set up, but we will also be pleased to assemble the individual components for you.
Discover more about the modular SI worm geared motors!
Find out more
Soft and Clean: The EP worm gear unit SMI
SMI worm gear systems feature a clean, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes this product ideally suited for harsh and challenging industries like meals processing and pharmaceuticals.
Versatile input designs such as NEMA, IEC or direct motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units possess on all sides different repairing possibilities and enable an easy assembling for the client.
Additional drive configurationscan be designed by use of built-on components (e.g. torque arm and output flanges). The housings are made in light weight construction out of aluminium die cast. Motor attachment is realised generally through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Electric motor – incorporating the following features: 1 to 6V voltage rating, 17100 rpm simply no load rate, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 electric motor (included), most ideal for applications where an easy to match, high torque result is required, nylon housing and equipment, requires light essential oil or silicon grease lubrication, ideal for student based projects including robots and buggies.
Most ideal for applications where an easy to match, high torque result is required
Ideal for student based tasks including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC motor with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared engine with self-lock, that’s, in the case of motor without electrical, the output axis is usually fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole electric motor output shaft relatively-short than general gear motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windows, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s engine is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is certainly a better option compared to the spur gear motor. How come worm gear so special? Take a look wiki out: Worm Drive.
“Unlike with ordinary gear trains, the path of transmission (input shaft vs result shaft) isn’t reversible when working with large reduction ratios, because of the greater friction involved between the worm and worm-wheel, when usually a single start (1 spiral) worm is used. This is often a advantage when it is desired to eliminate any likelihood of the output driving the input.”
In other phrases, it is hard to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g