Basic Description
Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is built to operate material managing products. The lowering movement is achived through the solenoid valve with the reducing pace controlled by an adjustable needle valve. The left and correct functions are equipped which has a dual pilot operated verify valve and cross-over relief valves.
Remark: Please talk to our revenue engineer for that various pump displacement, motor electrical power or tank capacity.
Distinctive Notes
1. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned prior to set up of the electrical power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of charge of impurities.N46 hydraulic oil is proposed.
four. This energy unit needs to be mounted horizontal.
5. Check the oil level while in the tank immediately after the initial start of the power unit.
6. Oil changing is needed just after the initial one hundred operation hrs, afterwards the moment each 3000 hours.