All EPT shaft collars, including quick-clamping collars, are solitary point faced to ensure perpendicularity and proper alignment. This critical manufacturing stage assures specific shaft collar deal with to bore relationship leading to correct element positioning on the shaft and possibly pressure on interfaced factors.
Quick-clamping shaft collars from EPT are made of high quality metal with type-II sulfuric anodized finishes, with a dark-colored finish about the collar and a precious metal finish in the clamping lever for added visibility. Aluminium collars are corrosion resilient, lighter than various other metals, have low inertia and also have nonmagnetic properties. All EPT goods are RoHS and REACH compliant. Available normal sizes for the quick-clamping shaft collars will be 0.375” to 1 1.5” in the inches series and 8 mm to 38 mm in the metric series.
Shaft Collar, Program of Measurement Inch, Shaft Locking Type – Couplings 1 Piece Speedy Clamp, Bore Type – Collars Ordinary Bore, Bore Dia. 3/8 In., Material – Collars Black Anodized 6061 Aluminum, Outdoors Dia. 1-1/2 In., Width .394 In., Clearance Dia. 1.496 In., Screw Size M3, Screw Material 18-8 300 Series STAINLESS, Operating Temp. Selection -40 Degrees to 200 Degrees F, Criteria RoHS2 Compliant, REACH Compliant
The Shaft Collar 1×3/8, 1/2″ for Key Shaft is made from lightweight Aluminum, the two piece design enables you to install these collars anywhere on a shaft without removing components. Furthermore to reducing the overall weight, the flats enable you to rotate a shaft without marring or gouging the shaft. Simply place the collar on the shaft and tighten both socket-brain cap screws to secure the collar and a wrench and become added to the collar’s flats to rotate the complete shaft/collar assembly.
Made of lightweight Aluminum
Allows you to install these collars anywhere on a shaft without removing components
Basically place the collar on the shaft and tighten the two socket-head cap screws to secure the collar
Flats enable you to rotate a shaft without marring
Shaft Clamp china Climax Part C-056-S Established Screw Collar is manufactured with T303 STAINLESS, which works well in corrosive environments. Sizes will be 9/16 in. Bore, 1 in. OD, 7/16 in. Width. It really is effective on hard and very soft shafts. It is a Affordable collar design, and Easily installed where main disassembly would in any other case be required.
EPT speedy clamping shaft collars collar clamp hinge acquire manufacturing 2 1 8 in steel,shaft collar clamp force manufacturing steel vex clamping design,vex clamping shaft collar collars 1 part with lever clamp hinge,vex clamping shaft collar clamp 3d model making quick 1 3 8 in alum,EPT speedy clamping shaft collars collar clamp 2pc 1 in metal stainless split with lever,climax metal s shaft collar two part clamp style EPT quick clamping collars 2pc 1 in steel pressure,clamp on shaft collars couplings universal clamping collar style with mounting holes 2pc 1 in steel,shaft collar clamp power clamping calculation quick connect collars at best cost in,clamp shaft collar clamping collars force calculation quick connect,stainless steel double split shaft collar with quick clamping clamp hinge push calculation.
Black Oxide Plated Metal One-Piece Clamping Collar.
Recessed Screw Head provides an outside surface free of important projections for safety.
Design totally engages the shaft without marring.
Greater axial holding electrical power than collection screw collars.
Effective on hard & delicate shafts.
Indefinitely adjustable and easy to remove, one-piece clamping collars are usually used on hard or delicate standard round shafts, above a split hub or upon thin wall tube. By using friction to provide superior grip on bars and shafts, one split collars provide sturdier, more trustworthy results when compared to the set screw style of solid collars. In addition they offer tremendous axial ability, while reducing shaft distortion for superior performance and decreased wear and tear.

The collar clamping mechanism works fast and effectively with simple side opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the external surface of the collar. The look of the cam on the lever and the mating machined surface on the collar assure a tight fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N based on the collar bore size. In scenarios where higher holding ability is or clamp axial load is required, the quick-clamping collar is not the recommended decision. EPT offers a full line of industry-leading one-piece and two-part shaft collars designed for these applications.