Hanging Pulleys intended for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and tackle systems. They require about half the power of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Acetal, nylon, and aluminum are lightweight and corrosion resistant. Stainless is the most corrosion resistant.
Designs C, D, and J have a bracket on the bottom for tying off one end of a rope.
Style K reduce the force needed to keep your load set up. Unlike regular pulleys, these possess a V-groove for more grasp on your rope, plus they ratchet when under load so they won’t slip in the other direction. Pulley for3/8″ dia. rope can be arranged to ratchet even though not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to convert than pulleys without a bearing.
Aluminium and nylon are lightweight and corrosion resistant. Stainless has the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Acetal and aluminium are lightweight and corrosion resistant. Galvanized metal is certainly more corrosion resistant than iron and steel. Stainless steel may be the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also known as snatch metric gear rack china blocks, these pulleys open so it’s easier to feed the rope through the housing-a totally free rope end is not needed. Use them to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Aluminum is more lightweight than stainless steel. Stainless steel is definitely more corrosion resistant than aluminium.
Pulleys for Wire Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as block and tackle systems. They require about 50 % the force of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel is more corrosion resistant than steel.
Hanging Pulleys pertaining to Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and deal with systems. They require about half the force of a single-groove pulley to move the same load. They possess a bracket on the bottom for tying off one end of your wire rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Nylon is much lighter than metal. Aluminum can be corrosion resistant. Stainless is the most corrosion resistant.
Pulley with carabiner may mount to steel framing or hang in your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end is not needed. Use them to assist with horizontal pulling or even to guide a rope.
Style D pulleys possess a corrosion-resistant stainless housing.
Pulleys for Wire Rope-For Lifting
Utilize the bore to install these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never make use of to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Mount these pulleys to a set surface.
Pulleys with two grooves are for make use of in applications where multiple pulleys move an individual load, such as for example block and tackle systems.They can reduce the force needed to move the strain by up to 2 times in comparison to single-groove pulleys.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or products over people.
Hanging Pulleys to get Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and deal with systems. They require about half the drive of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Style E pulleys have bracket upon the bottom that enables you to tie off 1 end of your wire rope.
Warning: Never make use of to lift people or products over people.
Easy-Open up Hanging Pulleys for Wire Rope-For Lifting
Also called snatch blocks, these pulleys open so it’seasier to feed the rope through the housing-a free rope end isn’t needed.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and tackle systems. They require about 50 % the pressure of a single-groove pulley to move the same load.
Latch kits (sold separately) put in a latch to the swiveling hook on Design C to maintain rope secure.
Warning: Never use to lift people or products over people
Hanging Pulleys meant for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move an individual load, such as block and tackle systems. They can reduce the force needed to move the load by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Style A pulleys have a bracket on underneath for tying off one end of a rope.
Warning: Never make use of to lift people or products over people.
Easy-Open Hanging Pulleys for Rope-For Lifting
Also known as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a totally free rope end isn’t needed.
Warning: Never make use of to lift people or products over people.