Materials Handling Electrical power UNIT two
This electrical power unit attributes energy up gravity down circuit. Activate the start out solenoid to start out the motor to lift the machine. The lowing motion is activated by the solenoid valve with all the reducing speed controlled through the strain compensated flow manage valve. Goods of this series is often broadly utilized in the marketplace of logistic products for example fork lift, mini lift table, and so on.
1. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean every one of the hydraulic elements concerned ahead of mounting the power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which ought to also be clean and no cost of impurities, N46 hydraulic oil is advisable .
4. Oil transforming is needed just after the initial a hundred operation hrs,afterwards when each and every 3000 hours.
5. The energy unit should be mounted horizontally.
Material Managing Energy UNIT one
This electrical power unit is intended to the fork lift field, consisting of really effective gear pump, DC motor, manual raise and reduce valve, tank, ect. The up and down movement are managed through the lever of your manual release valve, that is equipped with an electrical switch to activate the motor. The lowing pace is controlled from the pressure compensated flow handle valve.
one. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean all the hydraulic components concerned in advance of set up of the electrical power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which need to also be clean and no cost of impurities, N46 hydraulic oil is recommended .
4. Oil transforming is required just after the first 100 operation hours, afterwards the moment each 3000 hours.
five. The power unit shown is designed to be mounted horizontally.