Single and dual reduction planetary gear drives to be utilized with electric, hydraulic, air motors or mechanical power insight from high swiftness, low torque sources to provide reduced speeds at increased torques. The input part has standard SAE pads for electric motor mounting. Obtainable in the three output configurations shown below. Many units could be furnished with an intrinsic parking brake.
Solitary reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input quickness is bound to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque rankings to about 1/3 to 1/2 the values shown. Models provide 95% power tranny efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output aspect has hub for Plastic Gear Rack mounting vehicle wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature can be standard on all wheel drives.

Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined input. Output side has a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel provides extra-huge tapered roller bearings, a ductile iron hub and high temperature treated ring equipment to minimize backlash growth due to wear. The external bearing nut provides the greatest in shaft retention and shaft power. Output could be a spindle shaft or different sizes of essential pinion gears.