Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed electric fan motor china Control switch. All the wiring in the middle of your electric motor, capacitor and quickness control change is still hooked up nevertheless the cord itself is normally detached as observed in the photos. (Discover “Control Notice” below for change type.)
T (See “Software Notice” below for make use of in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” lengthy with a collection screw clean. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.

Control Take note: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine just as (but you possess a rotating knob and you have a pull-chain). In the event that you order several electric motor at a time, we will do our better to supply your order with each one kind of control or the excess.
Application Note: Do NOT use this electric electric motor in a nonfan software. This is a totally enclosed fan electric electric motor and designed to have continuous ventilation over the engine casing for cooling. The casing isn’t vented and the electric powered motor will overheat and enter automatic thermal overload if run in a nonfan program where there isn’t strong ventilation past the engine. (Caution Note: the electrical motor will restart instantly when it cools back off.) Using this electric motor for applications aside from 18 & 24″ TPI fans may possibly also overload the motor and cause it to proceed into automated thermal overload. (Your lover blade from another producer may possess a steeper blade angle.)
Origin: This electric electric motor is produced in China.