Any damage over the teeth surfaces of the sprocket diminishes the life of your conveyor chain.
With traditional sprockets, considerably worn sprocket teeth were repaired by teeth padding or even the total sprocket was replaced. In both case, fix was costly and with teeth padding, accuracy was impaired. We produced new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our shoppers to the dramatic financial savings in cost and time.
Framework
The teeth is usually replaced by two procedures: individual tooth replacement or sectional teeth replacement.
The bolts and nuts made use of for mounting the teeth on towards the sprocket are spot-welded to stop loosening.
The respective structures are illustrated within the appropriate.
The over photograph as well as the best appropriate illustration demonstrate a sprocket for personal tooth replacement. Because the joint encounter in between the replaced teeth along with the sprocket is formed within a special arc, the bonding accuracy is substantial and the sprocket strength is enhanced. Furthermore, since the load acting over the mounting bolts is decreased, there exists significantly less likelihood of loosening. This sprocket development is patented.
You will discover two types of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are used for big sprockets receiving heavy loads and welded sheet steel hubs for other applications.