Why Coupling Grease?
Sufficient lubrication is essential for satisfactory gear coupling operation. Gear Coupling Grease is exclusively created for gear coupling applications to increase coupling daily life whilst significantly reducing maintenance time. Its substantial viscosity base oil and tackifier mix to keep the grease in spot and protect against separation and it is in comprehensive compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in shade and produced using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to high centrifugal forces normally uncovered in couplings. Bearing or common objective greases are likely to separate and lose effectiveness on account of large centrifugal forces about the many substances at high rotational speeds. These large centrifugal forces encountered in couplings separate the base oil from your thickeners. Hefty thickeners, which have no lubrication qualities, accumulate during the gear tooth mesh location leading to premature coupling failure. Gear Coupling Grease is designed to hugely resistant to centrifugal separation of your oil and thickener, which lets the lubricant for being utilized to get a comparatively lengthy period of time.
One of the secrets to the accomplishment of Gear Coupling Grease is the variable consistency through the entire operating cycle in the application. The consistency of our gear coupling grease adjustments using the working conditions. Doing work on the lubricant under actual support circumstances leads to the grease to turn into semi-fluid, functionally solash lubricating the dress in surfaces from the coupling. Because the grease cools, it returns to the unique consistency, thereby avoiding leakage.
Gear Coupling Grease is obtainable from stock in 14 oz. cartridges, 1 lb. and 5 lb. cans.
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust protection
Large load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in location beneath large speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated which has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
Why Coupling Grease?